ASI Controls Hardware

ASIC/2-7540

Fully Configurable controller, capable of unitary functions and supervisory (ASI or Modbus RTU) functions.
Needs power supply rated at 24 Vac, or 24-48 Vdc.

Point Count

• 16 Universal Inputs, 0-5 Vdc
• 12 Form A Binary Outputs
• 8 Analog Outputs, 0-10 Vdc

ASIC/2-8540

Fully Configurable controller, capable of unitary functions and supervisory (ASI or Modbus RTU) functions.
Needs power supply rated at 24 Vac.

Point Count

• 8 Universal Inputs, 0-5 Vdc
• 8 Form A Binary Outputs
• 4 Analog Outputs, 0-10 Vdc

ASIC/1-8655

Application-specific controller. Personalities for terminal equipment, such as WSHP, RTU, AHU, FCU, etc. Compare available sequences against your actual needs before selecting this controller.

Needs power supply rated at 24 Vac/Vdc. It draws 12 VA (plus loads).

Point Count

• 8 Universal Inputs, 0-5 Vdc
• 8 Form C Binary Outputs
• 2 Analog Outputs, 0-10 Vdc

ASIC/1-6000

Application-specific controller. It has personalities for VAV boxes, including straight shut-off boxes, parallel fan powered and series fan powered VAV boxes. Electric reheat, hydronic reheat and auxiliary heat available. Compare available sequences against your actual needs before selecting this controller. Controller is available in two different models. The ASIC/1-6000 contains an integral actuator. The ASIC/1-6000-MB does not have an integral actuator. In addition, each model is available in a -PD version, which removes the airflow sensor for pressure-dependent applications. Needs power supply rated at 24 Vac. It draws 6 VA (plus loads).

Point Count

• 6 Universal Inputs, 0-5 Vdc
• 5 Binary Outputs, solid-state Triacs
• 1 Analog Output, 0-10 Vdc

ASIC/1-8800

Application-specific controller. It has personalities for VAV boxes, including straight shut-off boxes, parallel fan powered and series fan powered VAV boxes. Electric reheat, hydronic reheat and auxiliary heat available. Can also handle dual-duct and volume tracking applications with the ASIC/1-8800-DD version, which features two airflow sensors. Compare available sequences against your actual needs before selecting this controller.

Needs power supply rated at 24 Vac.

Point Count

• 8 Universal Inputs, 0-5 Vdc
• 8 Triac Binary Outputs
• 2 Analog Outputs, 0-10 Vdc

EtherLink/2

The EtherLink/2 features an RJ-45 network connection, and a 9-pin serial connection capable of using either the RS-232 standard or the RS-485 standard.

Power is supplied by a 120 VAC transformer plug.

ASI BACport

The ASI BACport features an RJ-45 network connection, and a 9-pin serial connection capable of using either the RS-232 standard or the RS-485 standard.

It functions as a portal to allow BACnet/IP systems to access ASI hardware. At the same time, it supports UDP network connections to ASI Expert, allowing controller configurations to be accessed.

Power is supplied by a 120 VAC transformer plug.

ePAD04

The ePAD04 uses a 24 Vdc power supply.
It is ready to be mounted in a enclosure panel door, or a similar type installation.